[f-nsp] vlan byte-accounting issue on big iron rx

[Kennedy, Joseph]

Are you saying you can’t even enable it on a single vlan or that you have it enabled on some

but can’t enable it on all the vlans you want to?


What model line cards are you using?

Is the vlan in question spanning different models of line cards?

--JK

> Hi all,
>
> im using big iron rx (2.9 firmware) and trying to enable byte-accounting
> on vlans and im getting this:
>
> (config-vlan-201)#byte-accounting
> Error: Maximum burst cannot be greater than 1,250,000,000 bytes.
>
> i do not have rate limiting setup nor its for default vlan or anything,
> its actually doing the same thing on all vlans
>
> Thanks!
>
> AJ
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20131108/1d7f5845/attachment.html>