[f-nsp] IPv6 on FCX

[Mark Price]

Hi Matt,

On Thu, Nov 7, 2013 at 4:08 PM, Matt Kassawara <mkassawara at gmail.com> wrote:

> I can configure VEs with both "ipv6 address" and "ipv6 enable" on my FCX.
>  What version of code are you running?
>

The config was accepted for me, and is now installed in 'sho ipv6 route'
when removing follow-ve from the VE that I was configuring.

However, I'm still unable to communicate with ipv6 hosts on a vlan from VE
interface.  tcpdump from connected host shows no traffic when trying to
ipv6 ping from FCX to a host on ipv6 subnet on VE.

        SW: Version 08.0.00aT7f3


Have you been able to successfully pass ipv6 traffic via VE?


thanks,

Mark
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20131108/0100cf1d/attachment.html>