[f-nsp] IPv6 on FCX

[Matt Kassawara]

I'm running 7.3.00a in production and 8.0.01 in the lab... both with IPv6
working on VEs.  Can you provide the rest of your configuration?

P.S. - For unrelated reasons, I recommend upgrading to at least 8.0.01.


On Fri, Nov 8, 2013 at 12:14 AM, Mark Price <mprice at tqhosting.com> wrote:

>
> Hi Matt,
>
> On Thu, Nov 7, 2013 at 4:08 PM, Matt Kassawara <mkassawara at gmail.com>wrote:
>
>> I can configure VEs with both "ipv6 address" and "ipv6 enable" on my FCX.
>>  What version of code are you running?
>>
>
> The config was accepted for me, and is now installed in 'sho ipv6 route'
> when removing follow-ve from the VE that I was configuring.
>
> However, I'm still unable to communicate with ipv6 hosts on a vlan from VE
> interface.  tcpdump from connected host shows no traffic when trying to
> ipv6 ping from FCX to a host on ipv6 subnet on VE.
>
>         SW: Version 08.0.00aT7f3
>
>
> Have you been able to successfully pass ipv6 traffic via VE?
>
>
> thanks,
>
> Mark
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20131108/38eb5af7/attachment.html>