[f-nsp] IPv6 on FCX

[Randy McAnally]

C6500's work the same way.   Vlan (e.g. VE) has to be part of an 'UP' 
interface (tagged or not) for the vlan itself to go 'UP'.

~Randy

On 11/08/2013 10:46 am, Ryan Harden wrote:
> I doubt your issue is this simple, but with Brocade/Foundry at least
> one physical interface assigned to the VLAN must be ‘up’ in order for
> the ve to be ‘up’ and therefore in the routing table. This is
> different from other vendors where the virtual interface can be ‘up’
> by itself.