[f-nsp] Lost Password FCX stack switchs

[Youssef Bengelloun-Zahr]

Thanks, it did the trick.

Best regards.

Y.



2013/10/7 Valeri Streltsov <v.streltsov at tiera.org>

> Hi****
>
> ** **
>
> Just move firmware file to upper directory, like to fcx_last****
>
> ** **
>
> Valeri Streltsov****
>
> TiERA Broadband****
>
> ** **
>
> *From:* foundry-nsp [mailto:foundry-nsp-bounces at puck.nether.net] *On
> Behalf Of *Youssef Bengelloun-Zahr
> *Sent:* Monday, October 7, 2013 12:01 PM
> *To:* Brian Loveland
> *Cc:* Niels Bakker; foundry-nsp at puck.nether.net
> *Subject:* Re: [f-nsp] Lost Password FCX stack switchs****
>
> ** **
>
> Hello,****
>
> Follow up : Using another computer, I was able to enter boot monitor mode
> and perform password recovery procedure.****
>
> Now, new problem when I try to upgrade software version from FCXS07300f to
> FCXS07400b, I keep on hitting this message :
>
> telnet at ag01-ams01#copy tftp flash 10.101.1.1
> fcx_last/740b/Images/FCXS07400b.bin primary
> File name is too big****
>
> Any ideas ?
>
> Y.
>  ****
>
> ** **
>
> 2013/10/6 Youssef Bengelloun-Zahr <youssef at 720.fr>****
>
> On both units forming the stack, very slow.****
>
> ** **
>
> Y.****
>
> ** **
>
> ** **
>
>
> Le 6 oct. 2013 à 19:55, Brian Loveland <brian at aereo.com> a écrit :****
>
> Are you seeing slow console on both units or just one?****
>
> ** **
>
> We have lots of ICX6610 stack's deployed, if you are trying to console to
> the unit that is not the master, the console will be very slow as its
> remote console into the master.****
>
> But the bootup console is directly on each unit (before the stack is
> setup) so perhaps thats not the issue.****
>
> ** **
>
> On Sun, Oct 6, 2013 at 1:14 PM, Youssef Bengelloun-Zahr <youssef at 720.fr>
> wrote:****
>
> Hello Niels,
>
> Again, console port is really responding very slowly.
>
> For some kind of reason I can't explain, it won't let me enter boot
> monitor mode even when keep on hiting 'b' stroke. Very weird shit !?!
>
> I guess I'll try with a different computer + serial cable tomorrow.
>
> Y.
>
>
>
> Le 6 oct. 2013 à 18:47, Niels Bakker <niels=foundry-nsp at bakker.net> a
> écrit :****
>
>
> > * youssef at 720.fr (Youssef Bengelloun-Zahr) [Sun 06 Oct 2013, 12:58
> CEST]:
> >> When I tried to log in again, I was prompted for a login/password. I
> didn't configure any before rebooting.
> >
> > You may have configured a different AAA model, which, if you omit users,
> will lead to lockout.
> >
> >
> >> All usual dumb passwords don't work, and I can't enter the boot monitor
> mode when I reload the stack !?! So, classic lost password recovery
> procedure isn't helpfull here.
> >
> > What do you mean with "can't"?  Just send 'b' over the serial console
> several times directly after a powercycle, and follow the rest of the
> instructions in the FastIron Config Guide ("no password" and so on).
> >
> >
> >    -- Niels.
> >
> > --
> > _______________________________________________
> > foundry-nsp mailing list
> > foundry-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/foundry-nsp
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp****
>
> ** **
>
>
>
>
> --
> Youssef BENGELLOUN-ZAHR****
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>



-- 
Youssef BENGELLOUN-ZAHR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20131007/79c50944/attachment.html>