[f-nsp] Show processes on a FESX

["Rolf Hanßen"]

Hi,

I am wondering how to get a processlist on a FESX.
Had a box with strange load and wanted to look what is causing it.

"show cpu-utilization" lists only the total utilization and there is also
no "show proc cpu" or similar that sounds to me like what I look for.
I found some "show tech-support cpu" in the manuals but this is not
available.

sh version:
  SW: Version 07.2.00aT3e1 Copyright (c) 1996-2010 Brocade Communications
Systems, Inc.
      Compiled on Nov 10 2010 at 19:22:15 labeled as SXS07200a
      (2992228 bytes) Primary SXS07200a.bin
      BootROM: Version 07.2.00T3e5 (FEv2)
  HW: Stackable FESX424HF+2XG
==========================================================================
      Serial  #: xxxxxxxxx
         License: BASE_SOFT_PACKAGE   (LID: hnFHFMHILI)
      P-ASIC  0: type 00D1, rev D2  subrev 00
      P-ASIC  1: type 00D1, rev D2  subrev 00
      P-ASIC  2: type 01D1, rev 00  subrev 00
      P-ASIC  3: type 01D1, rev 00  subrev 00
==========================================================================
  333 MHz Power PC processor 8245 (version 129/1014) 66 MHz bus
  512 KB boot flash memory
16384 KB code flash memory
  128 MB DRAM
The system uptime is 1092 days 14 hours 11 minutes 15 seconds
The system started at 00:56:12 GMT+01 Thu Apr 21 2011

The system : started=warm start   reloaded=by "reload"


Afaik that is one of the last supported releases for that hardware.

kind regards
Rolf