[f-nsp] management vrf on mangement port

[Franz Georg Köhler]

Hello everyone,


I am currently trying to set up management port 1 on netiron with a
management vrf to let the router have a default route for the management
ip only.

However, my device does not install any routes, I even cannot ping the
own ip address, port is shown up.

This is what I did, basic config which should be OK to my understanding?


vrf management
rd 29066:01
address-family ipv6
ipv6 route ::/0 <gw>

int man 1
vrf forwarding management
ipv6 addr <ip>

There is also no change if I set

management-vrf management

or not.



Best regards,

Franz Georg Köhler