[f-nsp] management vrf on mangement port

[Eldon Koyle]

What code version are you running?  Is this an MLX or something else?

If it's an MLX, I'm assuming you are running 05600b.  Have you tried
with an IPv4 address?  It seems like IPv6 support lags on new features,
and VRF support for the management interface is new in the 5.6 code.

I think that code is a bit new for most people to be comfortable running
it, so this is probably not a well-tested feature.

-- 
Eldon Koyle
-- 
Economists can certainly disappoint you.  One said that the economy would
turn up by the last quarter.  Well, I'm down to mine and it hasn't.
		-- Robert Orben

On  Feb 13 16:32+0100, Franz Georg Köhler wrote:
> Hello everyone,
> 
> 
> I am currently trying to set up management port 1 on netiron with a
> management vrf to let the router have a default route for the management
> ip only.
> 
> However, my device does not install any routes, I even cannot ping the
> own ip address, port is shown up.
> 
> This is what I did, basic config which should be OK to my understanding?
> 
> 
> vrf management
> rd 29066:01
> address-family ipv6
> ipv6 route ::/0 <gw>
> 
> int man 1
> vrf forwarding management
> ipv6 addr <ip>
> 
> There is also no change if I set
> 
> management-vrf management
> 
> or not.
> 
> 
> 
> Best regards,
> 
> Franz Georg Köhler
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp