[f-nsp] Two Serveriron on Active/Active mode

Rupesh Basnet brupesh at subisu.net.np
Sat Jun 7 22:04:09 EDT 2014


Hi,

There is L2 loop between two serveriron. Redirections traffic between 
those serveriron seems to be looped. Is there anyway to stop it? I have 
been looking around on foundry docs but couldn't get any informations.

Regards,
--------
Rupesh Basnet

System Operations
Subisu Cablenet (P.) Ltd.
148 Thirbum Sadak
Baluwatar, Kathmandu
Nepal


T: 00977 1 4429616/17 Ext.: 322,323(4412832-Direct Line)
F: 00977 1 4430572

http://www.subisu.net.np

(An ISO 9001:2008 Certified Company)

On 06/04/2014 11:35 PM, Rupesh Basnet wrote:
> Hi All,
>
> We have deployed two foundry serveriron on different locations which 
> are running in L2 mode and there is point to point connection between 
> them. We are using those serveriron for http redirections between our 
> cache server. Till now, we were deploying cache server on single 
> locations connected to single serveriron and since few days we have 
> been trying to add cache server on next serveriron as well. After we 
> add server on cache group, high traffic is observed on p2p link 
> between two serveriron and serveriron hangs and we need to reboot it. 
> Do we need to do some special configurations do connect server on both 
> the SI and to have the load shared.
>
>         ------------------ ------------------
>         | serveriron1 |<------L2---------->  serveriron1 |
>         ------------------- -------------------
>         cache1|cache2 cache3(recently added)
>
>
> SI#show version
>   SW: Version 09.3.00eTD4 Copyright (c) 1996-2003 Foundry Networks, Inc.
>       Compiled on Jun 28 2005 at 18:57:32 labeled as WXR09300e
>   HW: ServerIronGT E-2 Router, SYSIF version 21, Serial #: Non-exist
> ========================================================================== 
>
> SL 1: B0GMR WSM2 Management Module, SYSIF 2, M6, ACTIVE
>       Serial #:   CH39040033
>     0 MB SHM, 2 Application Processors
> 16384 KB BRAM, SMC version 1, BM version 21
>   SW: (1)09.3.00eTF2 (2)09.3.00eTF2
> ========================================================================== 
>
> SL 4: J-BxGC16 JetCore Gig Copper Module, SYSIF 2
>       Serial #:   CH33060779
>  4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 12, version 0449
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 13, version 0449
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 14, version 0449
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 15, version 0449
>




More information about the foundry-nsp mailing list