[f-nsp] LACP with Foundry and Linux Machine

[Rupesh Basnet]

Hi George,

lacp_rate was set to slow. I tried changing it to fast as well but still 
couldn't get any success.

Regards,
--------
Rupesh Basnet


On 03/28/2014 12:17 AM, George B. wrote:
> Did you set the lacp_rate option?
>
> e.g: bonding mode=4miimon=100lacp_rate=1
>
> The default is 0 or "slow" (30 sec). set to 1 (fast, 1 sec) and see if 
> that makes any difference.
>
>
>
> On Thu, Mar 27, 2014 at 11:27 AM, Rupesh Basnet <brupesh at subisu.net.np 
> <mailto:brupesh at subisu.net.np>> wrote:
>
>     Hi George,
>
>     First I tried mode 4(802.3ad) at first but LACP didn't formed at all.
>
>     Regards,
>     --------
>     Rupesh Basnet
>
>     On 03/28/2014 12:09 AM, George B. wrote:
>>     "I have configured my linux box on mode 0"
>>
>>     Wouldn't you need to use mode 4?
>>
>>     802.3ad or 4
>>
>>     		IEEE 802.3ad Dynamic link aggregation.  Creates
>>     		aggregation groups that share the same speed and
>>     		duplex settings.  Utilizes all slaves in the active
>>     		aggregator according to the 802.3ad specification.
>>
>>
>>     On Thu, Mar 27, 2014 at 10:44 AM, Rupesh Basnet
>>     <brupesh at subisu.net.np <mailto:brupesh at subisu.net.np>> wrote:
>>
>>         Hi All,
>>
>>         I have been trying LACP between Foundry and Linux machine
>>         since some days but not able to figure out the issue and
>>         resolve the issue. I didn't see much configurations thats
>>         needs to be done on foundry. I have configured my linux box
>>         on mode 0 and bonding seems to be up but still I am not able
>>         to pass traffic through it.
>>
>>         Serveriron Configurations:
>>
>>         interface ethernet 4/2
>>          port-name **LACP-with-Linux***
>>          no spanning-tree
>>          link-aggregate active
>>         !
>>         interface ethernet 4/3
>>          port-name **LACP-with-Linux***
>>          no spanning-tree
>>          link-aggregate active
>>         !
>>
>>
>>         SI#show version
>>           SW: Version 09.3.00eTD4 Copyright (c) 1996-2003 Foundry
>>         Networks, Inc.
>>               Compiled on Jun 28 2005 at 18:57:32 labeled as WXR09300e
>>           HW: ServerIronGT E-2 Router, SYSIF version 21, Serial #:
>>         Non-exist
>>         ==========================================================================
>>         SL 1: B0GMR WSM2 Management Module, SYSIF 2, M6, ACTIVE
>>               Serial #:   CH39040033
>>             0 MB SHM, 2 Application Processors
>>         16384 KB BRAM, SMC version 1, BM version 21
>>           SW: (1)09.3.00eTF2 (2)09.3.00eTF2
>>         ==========================================================================
>>         SL 4: J-BxGC16 JetCore Gig Copper Module, SYSIF 2
>>               Serial #:   CH33060779
>>          4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a
>>         32768 KB PRAM and 2M-Bit*1 CAM for IGC 12, version 0449
>>         32768 KB PRAM and 2M-Bit*1 CAM for IGC 13, version 0449
>>         32768 KB PRAM and 2M-Bit*1 CAM for IGC 14, version 0449
>>         32768 KB PRAM and 2M-Bit*1 CAM for IGC 15, version 0449
>>
>>
>>         SI#show link-aggregate
>>         System ID: 000c.db5d.b066
>>         Long  timeout: 90, default: 90
>>         Short timeout: 3, default: 3
>>         Port  [Sys P] [Port P] [ Key ]
>>         [Act][Tio][Agg][Syn][Col][Dis][Def][Exp][Ope]
>>         4/2        1        1     483   Yes   S   Agg  Syn  Col  Dis
>>          Def No   Ope
>>         4/3        1        1     483   Yes   S   Agg  Syn  Col  Dis
>>          Def No   Ope
>>
>>
>>         Status of linux machine:
>>         MII Status: up
>>         MII Polling Interval (ms): 30000
>>         Up Delay (ms): 0
>>         Down Delay (ms): 0
>>
>>         Slave Interface: eth0
>>         MII Status: up
>>         Speed: 1000 Mbps
>>         Duplex: full
>>         Link Failure Count: 0
>>         Permanent HW addr: 00:e0:ed:2b:a1:99
>>         Slave queue ID: 0
>>
>>         Slave Interface: eth1
>>         MII Status: up
>>         Speed: 1000 Mbps
>>         Duplex: full
>>         Link Failure Count: 0
>>         Permanent HW addr: 00:e0:ed:2b:a1:98
>>         Slave queue ID: 0
>>
>>         -- 
>>         Regards,
>>         --------
>>         Rupesh Basnet
>>
>>         _______________________________________________
>>         foundry-nsp mailing list
>>         foundry-nsp at puck.nether.net <mailto:foundry-nsp at puck.nether.net>
>>         http://puck.nether.net/mailman/listinfo/foundry-nsp
>>
>>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20140328/7644daf5/attachment.html>