[f-nsp] Brocade cam profile / System max values

[Dennis op de Weegh]

Hi Eldon,

Card 1 is a NI-XMR-10Gx4

With the cam profile 768k IPv4 routes and 64k Ipv6 routes (Same number of routes as the BR-MLX-10Gx4-x card).



Kind regards/Met vriendelijke groet,

Dennis op de Weegh

 

Bitency
Willem van Oranjestraat 9
4931NJ Geertruidenberg
 
Kvk nummer: 20144338
BTW nummer: NL213538519B01
 
W: www.bitency.nl
E: info at bitency.nl
T: +31 (0)162 714066
 


-----Oorspronkelijk bericht-----
Van: ekoyle at gmail.com [mailto:ekoyle at gmail.com] Namens Eldon Koyle
Verzonden: donderdag 10 maart 2016 19:13
Aan: Dennis op de Weegh <info at bitency.nl>
CC: foundry-nsp at puck.nether.net
Onderwerp: Re: [f-nsp] Brocade cam profile / System max values

Dennis,

I guess I mis-read your question.  Please provide the output of 'show module'.

I suspect that slot 1 is not a -X card (1M IPv4 routes max), but a
NI-MLX-10Gx4 (512K ipv4 routes max).

--
Eldon Koyle

On Thu, Mar 10, 2016 at 11:09 AM, Eldon Koyle <ekoyle+puck.nether.net at gmail.com> wrote:
> Hi Dennis,
>
> I don't see you changing the ip6 system-max param anywhere... looks 
> like your max is 245760 for ipv6-cache/route, but it is currently set 
> to 65536.
>
> You need to add a system-max ipv6-cache/ipv6-route to your config and 
> then you will need a reload.  Also, are you running all -X modules in 
> this device?
>
> --
> Eldon Koyle
>
>
> On Thu, Mar 10, 2016 at 8:35 AM, Dennis op de Weegh <info at bitency.nl> wrote:
>> Hi,
>>
>>
>>
>> We have a Brocade MLXe-4 with one 4x 10 Gbit card and HSF’s.
>>
>>
>>
>> We get this warning in our logs:
>>
>>
>>
>> CAM IPv6 partition warning: total 65536 (reserved 0), free 3276, slot 
>> 1, ppcr 0
>>
>>
>>
>> But we have 27629 +- IPv6 routes (including internal routes)?
>>
>>
>>
>> #show run | inc cam
>>
>> cam-partition profile ipv4-ipv6-2
>>
>>
>>
>> #show run | inc system-max
>>
>> system-max vlan 4095
>>
>> system-max rstp 128
>>
>> system-max ip-cache 590000 – setting value next week to 768000
>>
>> system-max ip-route 590000 – setting value next week to 768000
>>
>> system-max virtual-interface 4095
>>
>>
>>
>>
>>
>> #show default values | inc ipv6
>>
>> ipv6-cache               65536      245760     65536      65536      65536
>> Yes
>>
>> ipv6-route               65536      245760     65536      65536      65536
>> Yes
>>
>> ipv6-mcast-cam           2048       16384      2048       2048       2048
>> No
>>
>> ipv6-vrf-route           128        16384      128        128        128
>> Yes
>>
>> ipv6-receive-cam         0          8192       0          0          0
>> No
>>
>>
>>
>>
>>
>> system-max for ipv6 is default set to max.?
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Regards,
>>
>>
>>
>> Dennis
>>
>>
>> _______________________________________________
>> foundry-nsp mailing list
>> foundry-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/foundry-nsp