[f-nsp] Brocade cam profile / System max values

[Eldon Koyle]

Dennis,

What version of code are you running?  There could be a bug...

What does 'sh ipv6 route summary' say?

-- 
Eldon Koyle


On Thu, Mar 10, 2016 at 11:15 AM, Dennis op de Weegh <info at bitency.nl> wrote:
> Hi Eldon,
>
> Card 1 is a NI-XMR-10Gx4
>
> With the cam profile 768k IPv4 routes and 64k Ipv6 routes (Same number of routes as the BR-MLX-10Gx4-x card).
>
>
>
> Kind regards/Met vriendelijke groet,
>
> Dennis op de Weegh
>
>
>
> Bitency
> Willem van Oranjestraat 9
> 4931NJ Geertruidenberg
>
> Kvk nummer: 20144338
> BTW nummer: NL213538519B01
>
> W: www.bitency.nl
> E: info at bitency.nl
> T: +31 (0)162 714066
>
>
>
> -----Oorspronkelijk bericht-----
> Van: ekoyle at gmail.com [mailto:ekoyle at gmail.com] Namens Eldon Koyle
> Verzonden: donderdag 10 maart 2016 19:13
> Aan: Dennis op de Weegh <info at bitency.nl>
> CC: foundry-nsp at puck.nether.net
> Onderwerp: Re: [f-nsp] Brocade cam profile / System max values
>
> Dennis,
>
> I guess I mis-read your question.  Please provide the output of 'show module'.
>
> I suspect that slot 1 is not a -X card (1M IPv4 routes max), but a
> NI-MLX-10Gx4 (512K ipv4 routes max).
>
> --
> Eldon Koyle
>
> On Thu, Mar 10, 2016 at 11:09 AM, Eldon Koyle <ekoyle+puck.nether.net at gmail.com> wrote:
>> Hi Dennis,
>>
>> I don't see you changing the ip6 system-max param anywhere... looks
>> like your max is 245760 for ipv6-cache/route, but it is currently set
>> to 65536.
>>
>> You need to add a system-max ipv6-cache/ipv6-route to your config and
>> then you will need a reload.  Also, are you running all -X modules in
>> this device?
>>
>> --
>> Eldon Koyle
>>
>>
>> On Thu, Mar 10, 2016 at 8:35 AM, Dennis op de Weegh <info at bitency.nl> wrote:
>>> Hi,
>>>
>>>
>>>
>>> We have a Brocade MLXe-4 with one 4x 10 Gbit card and HSF’s.
>>>
>>>
>>>
>>> We get this warning in our logs:
>>>
>>>
>>>
>>> CAM IPv6 partition warning: total 65536 (reserved 0), free 3276, slot
>>> 1, ppcr 0
>>>
>>>
>>>
>>> But we have 27629 +- IPv6 routes (including internal routes)?
>>>
>>>
>>>
>>> #show run | inc cam
>>>
>>> cam-partition profile ipv4-ipv6-2
>>>
>>>
>>>
>>> #show run | inc system-max
>>>
>>> system-max vlan 4095
>>>
>>> system-max rstp 128
>>>
>>> system-max ip-cache 590000 – setting value next week to 768000
>>>
>>> system-max ip-route 590000 – setting value next week to 768000
>>>
>>> system-max virtual-interface 4095
>>>
>>>
>>>
>>>
>>>
>>> #show default values | inc ipv6
>>>
>>> ipv6-cache               65536      245760     65536      65536      65536
>>> Yes
>>>
>>> ipv6-route               65536      245760     65536      65536      65536
>>> Yes
>>>
>>> ipv6-mcast-cam           2048       16384      2048       2048       2048
>>> No
>>>
>>> ipv6-vrf-route           128        16384      128        128        128
>>> Yes
>>>
>>> ipv6-receive-cam         0          8192       0          0          0
>>> No
>>>
>>>
>>>
>>>
>>>
>>> system-max for ipv6 is default set to max.?
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Regards,
>>>
>>>
>>>
>>> Dennis
>>>
>>>
>>> _______________________________________________
>>> foundry-nsp mailing list
>>> foundry-nsp at puck.nether.net
>>> http://puck.nether.net/mailman/listinfo/foundry-nsp