[f-nsp] ARP Timeouts

[Mike Allen]

Hey Nick, that is the time since that arp was last seen, once the age hits
240 it would disappear. If it's active, it will refresh the age. I am
pretty sure it's in minutes, not seconds.

Mike
On May 24, 2016 11:21 AM, "Nick Cutting" <ncutting at edgetg.com> wrote:

On all of my brocade switches – my ARP timeouts seem to be about 10 seconds?



The documentation states that he default is 240 minutes (4 hours – same as
cisco)



I imagine the age is in seconds below?



Type     Age Port           Status

Dynamic  2   1/2/3          Valid

Dynamic  7   1/1/23         Valid

Dynamic  10  1/2/3          Valid

Dynamic  3   1/2/3          Valid

Dynamic  10  1/2/3          Valid

Dynamic  2   1/2/3          Valid

Host     3   1/2/3          Valid

Dynamic  2   1/2/3          Valid

Dynamic  10  1/2/3          Valid

Host     2   1/2/3          Valid

Dynamic  7   1/2/3          Valid

Dynamic  2   1/2/3          Valid

Dynamic  3   1/2/3          Valid

Dynamic  0   1/2/3          Valid

Dynamic  1   1/2/3          Valid





*Nick Cutting* | Network Engineer | Architecture & Standards Team| Office:
203-742-7856 | Fax: 203-742-7890



[image: cid:image001.png at 01D045E3.7FDE6B40]



_______________________________________________
foundry-nsp mailing list
foundry-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20160524/6e5f0c20/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 8309 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20160524/6e5f0c20/attachment-0001.png>