[f-nsp] CER: IPv6 Route ADD: CAM entry creation FAILED

[Derek]

Did you check the CAM utilization?  It's probably full, perhaps you can
partition it differently.

On Wed, Sep 6, 2017 at 2:30 PM, Brian Rak <brak at gameservers.com> wrote:

> Has anyone else seem problems with the CER's being unable to add routes
> before?  We have multiple devices (all 2024C-4X) reporting one or both of
> these messages:
>
> IPv6 Route ADD: CAM entry creation FAILED
> IPv4 Network Route ADD: CAM entry creation FAILED
>
> They're learning a full v4+v6 table, but we are well below the limits
> defined in `sh default values`.  From past experience, a reload seems to be
> the only thing that will actually correct this, but that is a pretty
> annoying thing to have to do.
>
> Any ideas for what may be causing this?  We're on 5.6.0m right now.
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp




-- 
Be Well,

Derek Labian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20170906/9de4a74b/attachment.html>