[f-nsp] SLX 9640 experiences

[Dennis op de Weegh]

Still no RPKI support?

Kind regards/Met vriendelijke groet,

Dennis op de Weegh

 

Bitency
Hoge Ham 24
5104JG Dongen
 
Kvk nummer: 20144338
BTW nummer: NL213538519B01
 
W: www.bitency.nl
E: info at bitency.nl
T: +31 (0)162 714066

-----Oorspronkelijk bericht-----
Van: foundry-nsp <foundry-nsp-bounces at puck.nether.net> Namens Clement Cavadore
Verzonden: vrijdag 6 december 2019 08:26
Aan: foundry-nsp at puck.nether.net
Onderwerp: Re: [f-nsp] SLX 9640 experiences

Hi Fredy,

On Fri, 2019-12-06 at 07:55 +0100, Fredy Kuenzler wrote:
> Thanks for asking again. 2nd round of tests succeeded, we after a
> very long evaluation phase decided to buy the SLX 9640 and dumped the
> Cisco NCS-55A2. Apparently we‘re in good company if one wants to
> believe from hearsay.

Quite interested in having more feedbacks regarding your tests and
evaluation pase on that platform. I had feedbacks regarding stability
and bugs on SLX (IXP context, production network), and I was quite
scared about it. And the concerned IXP is finally in the process of
dumping that hardware from their fabric...

> The first batch got delivered this week (see pic), we plan to power
> up a few in the lab anytime soon.
> 
> Can’t say much more yet except they look nice with the violet front
> bezel 😇

Ahahaha ! That violet colour reminds me quite bad memories :)

> Meanwhile we launched a project to automate configuration. At the
> same time physical deployment in the many pops will take place. The
> goal is to have payload in Q1 on them and get rid off the MLXe and
> XMR by Q2 2020.

Good luck with that ! :-)

-- 
Clément Cavadore
_______________________________________________
foundry-nsp mailing list
foundry-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp