Heathkit SB-620 Scanalyzer For Sale

[Dan Ferguson]

I'm looking for a SB620  (as well as an SB310 receiver).

Do you have the spare coils that originally came with the SB620 kits for the
other IF frequencies.


Dan Ferguson


At 15:34 09/09/97 -0700, Chris Trask wrote:
>        I have a Heathkit SB-620 Scanalyzer for sale.  This is a fully
>working unit, although it was originally built for the Swan 350 trans-
>ceiver with a 5174 kHz IF, which can be converted by anyone with suf-
>ficient hands-on know-how.  For those just getting familiar with the
>Heathkit SB-series, this unit is a narrow-band spectrum analyzer that
>connects to the plate of an IF amplifier in the receiver, and was sold
>with options to accomodate a wide variety of commercial amateur equip-
>ment.  Sorry, but my manual is of too poor a quality to provide a copy.
>Cosmetically good, with a few scratches on the case and CRT bezel.
>Being sold here for $75 plus shipping.
>
>                                          Regards,
>
>                                          Chris
>
>     ,----------------------.       Circuit Design for the
>    / If you understand it,  \            RF Impaired
>   /   then it's obsolete!   /
>   \  _______,--------------'        Chris Trask / N7ZWY
>  _ |/                               Principal Engineer
> oo\                                 ATG Design Services
>(__)\       _                          P.O. Box 25240
>  \  \    .'  `.                  Tempe, Arizona 85285-5240
>   \  \  /      \
>    \  '"        \                     Technical Editor,
>     .       (  ) \                      QRP Quarterly
>      '-| )__| :.  \                     QRP ARCI 9464
>        | |  | | \  '.
>       c__; c__;  '-..'>.__      Email:  ctrask at primenet.com
>
>                    Graphics by Loek Frederiks
>
>

+ + + + + + + + + + + + + + + + + +
+ Dan Ferguson      df at mnsinc.com +
+                                 +
+ Wanted: Heath SB310/SB620/AR-3  +
+         Knight R100A            +
+ + + + + + + + + + + + + + + + + +
+  Check out the #swl channel on  +
+    EFNET Internet Relay Chat    +
+ + + + + + + + + + + + + + + + + +