HW16 Operating Question

[Mike Souhrada]

Bob/WB0AUQ wrote:
>
> Richard Prescott wrote:
> >
> > If you put in a crystal in the transmitter, key down, then turn the main
> > receiver (big) dial, are you supposed to be able to zero beat the
> > transmitter frequency in the receiver?
> Yes, you should be able to hear it.  However, the sidetone may be
> a bit weak, the TX should be fully loaded to get a respectable
> signal, even then will be weak. Don't remember but bet there is
> an internal adjustment for sig strength.
> --
> Bob/WB0AUQ    AMI #213     SPAM #1162    FISTS #1905
>
Actually guys the sidetone can be deafining! I've restored about 12 of
these
so far, and have two in "inventory". Sounds like you need to re-align
the side
tone  frequency to correspond with the received frequency.
That's all covered in the manual.
GL
Mike
Le Claire, Ia

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --