Heath GH-17 Soldering Iron

[Ed Mosher]

Murray is right.  The threads were 5/16" x 20.  Sorry 'bout that.

Ed Mosher
WA8ZVO at JUNO.COM         Formerly  "One of the Hams at Heath"
  "Corporations make decisions based on dollars, not SENSE!"

On Sun, 16 Aug 1998 23:52:44 -0400 Multi-Volti Devices
<multi-volti at softhouse.com> writes:
>Maybe I'm wrong, but I remember the threads looking alot bigger than
>1/4-20,
>but I'm thinking of the model with the perforated cover, and the tips
>that
>had the integral heating element.
>
>Murray
>
>Ed Mosher wrote:
>
>> Fellow Greenies,
>>
>> Here's the specs for the iron tips that have been a recent thread:
>>
>> There were three tips available.  They were all  6V,  25W (nominal)
>and
>> had either a 3/16" chisel, 3/16" pyramid or 1/4" chisel tip.  The
>iron
>> itself had three output levels of  4.5V, 5.5V or 6.5V for Low, Med
>or HI
>> temp.  The tips have a 1/4" x 20 thread as I recall, and I will
>verify
>> that if necessary.  There is a chance that someone monitoring the
>list
>> can make new tips!  Stand by for more on this.  Either he or I will
>post
>> info when available.
>>
>> Ed Mosher
>> WA8ZVO at JUNO.COM         Formerly  "One of the Hams at Heath"
>> St. Joseph (On Beautiful Lake Michigan), MI
>>     "Corporations make decisions based on dollars, not SENSE!"
>>
>> --- --- --- --- --- --- --- --- --- --- --- --- --- --
>> To subscribe: listserv at listserv.tempe.gov
>> and in body: subscribe HEATH yourfirstname yourlastname
>> To unsubscribe:  listserv at listserv.tempe.gov
>> and in body: signoff HEATH
>> Archives for HEATH: http://www.tempe.gov/archives
>> --- --- --- --- --- --- --- --- --- --- --- --- --- --
>
>
>
>

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --