Small Parts Needed

[Stewart Lyon]

Hi Doug & gang,
Most of the parts you are looking for are readily available.

The rubber feet are available from "R & R" ( who maintains an on-line
catalog) and I have found them under the Dantona brand at Home Depot and
at two local radio stores - they come in a blue blister pak, 4 to a pak.

The bulbs are type 44 but should be replaced by type 47 which I found at
RadioShack and the same radio stores plus All-electronics (which
advertises in QST).

The 2-pin mic connectors are now sold under the WPI brand and listed in
both the Newark and Allied catalogs.  The microphone end is about $12 and
the radio side about $8.  Someone also posted a source called "RF
Connectors" or something like that a couple of months ago. I looked them
up once and found their prices around $3-4.

The posting by Dick,  WB8MHE about the 8-32 screws was good news to me
since I too am looking for those screws.  Wonder if they have the
phillips 6-32 screws that are on the front panel of these rigs??

73, Stu - W6CUX
Winnetka, CA

On Thu, 3 Dec 1998 20:31:18 -0500 Doug Shields <dcb at ECQUAL.NET> writes:
>Hello,
>1.  8-32 Oval head screws that hold the lid closed on the SB-102, 300,
>400 radios. These have a special undercut head.
>2.  Rubber feet for the same radios.  That are an exact match for the
>originals.
>3.  Replacement bulbs for the meter and tuning dial backlights.
>4.  2-Pin male microphone connectors for the SB-102, SB-401.

>Thanks very much for your help.
>Doug  W4DAS
>

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --