DX-100

[Wayne Tangey]

Hi all, I'm new to the list and have a big ask. Does anybody on the list
have a circuit for the DX-100 AM/CW rig that they can scan & email to me,
just the power supply would be fine. Failing a copy of the circuit does
anyone know the correct secondary voltage outputs of the low voltage xformer
as per the color code used. I got the manual with the rig but no circuit and
the manual gives no clue to the voltages. Obviously the filament windings
are easily worked out but there is a couple of higher voltage windings by
the look of it. Why do I need them ?  Well here down under (Australia) we
run on 240 AC mains, some drongo plugged the beasty (110 volts) into the
mains and the rest is history. A replacement transformer or a rewind is now
in order.


Cheers Wayne Tangey - VK6FT. Perth, Western Australia

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --