HW101 Drive Belts

[Stewart D Lyon]

John -- look thru the Heath-Tempe postings. That subject has been covered
several times, including by me.  The lastest was a PepBoys P/N by Gary
Poorman on 4/12/98.

Although Heath used the same belt for the driver and final loading, I'd
use a slightly longer belt for the final loading capacitor -- the one
used puts a big sidewise load on the cap and caused it to arc on my
SB101. I have one of the original SB100s and at that time they used dial
cord instead of belts (even was in the manual that way).  Thats what all
those notches, etc, are in the pullys are for. Hell to string but works
good.

73, Stu - W6CUX
Winnetka, CA
ARRL Life Member

On Mon, 11 May 1998 14:16:01 -0700 Jgarko <Jgarko at AOL.COM> writes:
>Hi all.... I just acquired a HW101 in need of the three (3) rubber belts
for
>the tuning section. Any idea of where to find replacements? Or maybe
some one
>has extras?
>Thanks in advance...
>John WA4KWK
>jgarko at aol.com

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --