HX-10 Maruder

[Conrad Hoffman]

Hi All,

Could someone with a schematic to the HX10 look up something for me?

The screen circuit of the speech amp V1A is identical to the screen circuit
for the anti trip amp V9A except the input voltage to the 1.5 meg resistor
is about 100 v higher for V9A.  This is what my schematic shows.  Does yours
show the same thing?  In my schematic pin 3 of V1A is 25 v. and pin 3 of V9A
is 175 v.  This can't be and V1A appears to be correct.  My question, should
the 175 v be changed to read 40 v or the 1.5 meg resistor be changed to give
175 V.  Any opinoins would be appreciated.

Conrad   W8MHH   crhoff at bellsouth.net

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --