Question with ID-5001 Weather Station

[Robert S. Capon]

Hi-

I'm in the process of building the ID-5001 weather station.  The boards are
all built, and I'm doing the final wiring, and I have a question.

The chassis is painted black on the outside, and on the inside there is
considerable paint "overspray".  There are a number of ground lugs attached to
the chassis, and I'm concerned that there won't be a good ground connection to
some of the lugs.  The manual doesn't call for sanding the chassis, so I'm
wondering if all of the ground lugs will be connected later with wiring, or if
I should go ahead and sand the chassis.

Any thoughts?  I've built many dc xcvrs and kits, but this is my first ac kit.
So I'm not sure what Heath recommended.

73,

Rob, W3DX

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --