SB-101

[Robert Naumann]

That connector allows you to connect the SB-640 external VFO.  These are
fairly rare, but you could find one if you hunt for it.

I had one that I bought used many years ago.  I used it with my SB102 and
noticed little drift on the tube LMO compared to the solid state one in the
'102.

Good luck !

73,

Bob N5NJ

(Formerly one of the "Hams at Heath")
----- Original Message -----
From: charles w. morehouse <cwmorehouse at WORLDNET.ATT.NET>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Wednesday, April 07, 1999 05:33
Subject: SB-101


> Keepers of the Green,
> Restoring my factory wired SB-101. There is a Molex connector on the
> back panel. No label and nothing in the manual. What is it for?
> Wayne;
> W4GBW
>
> --- --- --- --- --- --- --- --- --- --- --- --- --- --
> To subscribe: listserv at listserv.tempe.gov
> and in body: subscribe HEATH yourfirstname yourlastname
> To unsubscribe:  listserv at listserv.tempe.gov
> and in body: signoff HEATH
> Archives for HEATH: http://www.tempe.gov/archives
> --- --- --- --- --- --- --- --- --- --- --- --- --- --
>

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --