Buffing Knobs and other plastic parts

Mills, Lewis lmills at MAIL.STATE.MO.US
Wed Apr 28 11:34:15 EDT 1999


Bill Coleman wrote:
> You just have to hold the stick agains the buffing wheel
> for a bit, and this "loads up" the wheel with the compound.
> You can then
> buff away.
>
> Be warned that small parts can be thrown by the wheel with
> considerable
> force. Use a strong tool -- such as pliers to hold onto such parts.
> Always wear eye protection.
>
And also be prepared for a lot of heat and abrasion.  If you've never done
this before, that cloth wheel and even a very "mild" compound can quickly
wear away and melt plastic parts!
Lewis

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --




More information about the Heath mailing list