SB-102 Parts Needed.

[Dennis Heikura]

Hi Gang,

A supposedly parts SB-102 recently came under my care and guess what?
The rig is too crisp and clean and begs to be saved from the junque
pile so am in need of a few items, all mechanical:

        1.  The L shaped support rail and guide that holds the
            verticle RF section boards in place.

        2.  The large metal cover that goes over this section. The one
            with all the holes that your reach through with an align-
            ment tool to peak and tweak the oscillator and driver grid
            and plate coils.

        3.  The large dark green plastic front dial bezel that has the
            little stick on plate with "SB-102" on it.

        4.  Dial knob.

        5.  Case.

Missing some other stuff too but have a true parts SB-100 that will
be the source of them. Other knobs too of course. Surprisingly the lever
knobs and front foot extenders  are there and in good shape. Amazing.

As always, any help would be greatly appreciated.

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --