power cord quest

[Dave Edwards]

Which is exactly what Drake did on their AC4 power supply for
the amp switching two pin connector. (switched to an RCA jack)
...Dave
-----Original Message-----
From: Gary H Harmon Jr <gharmon at IDWORLD.NET>
To: HEATH at LISTSERV.TEMPE.GOV <HEATH at LISTSERV.TEMPE.GOV>
Date: Tuesday, January 19, 1999 7:45 AM
Subject: Re: power cord quest


>My solution would be to remove the chassis socket, mount a piece of
>aluminum plate inside the chassis using the original holes, drill a hole
>in the middle, install a normal 3 wire cable through the hole with
>appropriate mounting procedures, and then connect the wire inside.  Might
>be necessary to add a terminal strip and maybe bypass capacitors.  Seems
>like this would give a clean installation with no new holes.  Oh yes, keep
>the chassis socket in case power cords show up.  :o)
>
>Just one Heathkit lovers opinion......no charge.
>
>============
>
>

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --