Cabls ends

[Keith Rowland]

These are fairly hard to find these days, and I don't recall where I
bought the last ones I got a year or so ago.  But don't despair--a
PL-259 can be used.  The threading is a perfect fit.  Just cut or saw
off enough of the center pin of the PL-259 to make it make contact with
the center contact of the connector on the chassis, and you have it.

73,

Keith

R.K. Kennard wrote:

>   Does anybody know what kind of cable ends are used to hook up to the
> Heathkit IG-102 ( and other brands ) signal generator at the output
> terminals ?They would look almost like PL-259's without the extended
> center tip , just a button in the middle.thanks.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/19990721/585388f9/attachment.html>