power cable type summary

[David Fentem]

This post summarizes several of the responses I received from my query.
Several list members asked that I share the results, so here they are:

> What type cable (manufacturer and part no.) was used for the connection
> between the SB/HW-10x series transceivers and the HP-23x power supplies?

1.  Plain old 8-conductor rotator cable works just great! No problems at
this QTH...

2.  I am in the process of building thlis cable. I am using Belden 9157,
8
wire, 18 guage.  This should be available at any electronics store.
Good
luck.

3.  I don't have the exact numbers handy, but it was probably Belden
9-conductor cable, each being 18 g wire, except the Red and Black ( I
think it was these two colors), which as I recall were 16 g.  I know the
battery power cable for the HP-24 was "Belden - 8 Duplex" cable (two
wire, black and red, 8g due to power required for the Compact Kilowatt).

Thanks to all who responded.

-Dave

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"