SB-200 Lg. Knobs: WTB/Refinishing

[charles w. morehouse]

David,
Had corrosion on an SB-101 tuning knob. Mount on a short 1/4 inch shaft
and put in drill. Use 600 grit wet or dry paper to polish insert and
skirt. Brush on some clear lacquer. Looks like new. Or make a new insert
from thin aluminum. Hot glue to sanding disk and polish. Spray with
lacquer and hot glue over old. Good luck.
Wayne;
W4GBW

David Van wrote:
>
> Hi Greenies,
>
> I just acquired an SB-200 that is mint, except for the large knobs...
> someone (an aspiring artist?) scribed some lines on the center metal
> inserts. Does anyone have some of these knobs in very good (or better)
> condition that they would be willing to sell? I need two, preferably
> three. Please email privately with details.
>
> BTW, does anyone have any tips about refinishing the knob  inserts?
>
> Thanks much,
> -David, KM6RI
> varns at sjm.infi.net
>
> Sponsored by the City of Tempe
>
> Listserver Submissions:  heath at listserv.tempe.gov
> Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"