HW 5400

[charles w. morehouse]

Ron,
I always use anhydrous alcohol. It won't leave a residue. Don't use
rubbing or shellac thinner as that leaves a white film. NASA uses 200
proof alcohol but you can't buy that anymore thanks to the EPA. Luck and
73.
Wayne;
W4GBW

Ron S Kramer wrote:
>
> I am working on the High VCO board. I cleaned the board with Rosin Flux Remover
> from Radio Shack . When I try to solder od the pc board, it give off a burning
> smell
> which drive the family crazy. Any ideas on how I can remove the flux remover
> from the board???
>
> Ron KD6EDV