Tightening dial stringing

[Ed Richards]

No. One turn of the knob will move the same amount of string, (the
circumference of the shaft) no matter how many turns around the shaft. It
wouldn't matter if it did, as the calibration is between the dial and the
tuning capacitor, not the knob shaft.
Ed

On Mon, 12 Jun 2000 05:37:11 -0400 Mark S Graalman <wb8jkr at JUNO.COM>
writes:
>   Wouldn't taking another turn around the knob shaft
> throw off the dial linearity due to more string being
> moved per dial rotation?
>
> Mark  WB8JKR
>
> On Sun, 11 Jun 2000 14:30:52 +0000 Ed Richards <k6uuz at JUNO.COM>
> writes:
> > David;
> > It might be easier and more effective to take another turn adound
> > the
> > knob shaft. Good luck.
> > Ed Richards
> >
> >