WANTED: EXTENDER BOARD for the SB-104 !

[talen]

If you don't have an extender board, you can you can attach "probe wires"
to the points you wish to measure on the card. Just temporarily tack
one end of a short, small guage wire(s) to the desired point(s), plug the
card back in and attach you scope/meter to the other end. This combined
with the connector pin access on the bottom will suffice for most debug.

Having an extender card IS handy though, and most SB-104s do require
some debug.

73s  Kees K5BCQ

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"