SB-303

[KD2E]

Someone must have re-labeled it. There was no noise blanker on the 303.
I have a 303 with a noise blanker, but it is the SB104 noise blanker. There
was a QST or 73 article on how to add it. It uses as small toggle switch on
the rear panel to turn it on. It works GREAT!
Lower left control is the attenuator, which I never needed to use.
...Dave
----- Original Message -----
From: TERRY ENGLAND <w9cau at SOLTEC.NET>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Saturday, March 04, 2000 9:23 PM
Subject: SB-303


> Hello again, tnx to all who have sent me information on the LMO problem in
> my SB-303. Now I have an other question about the SB-303 rcvr, on mine the
> bottom left control is labeled noise blanker right next to the band
switch,
> ok on several pictures of the SB-303 I have seen that same control is
> marked as attenuator ? Is this just a later or earlyer version with
> different labeling on the control ? Or maybe a misprint on the pannal ?
>                 tnx agn  terry
>
> Sponsored by the City of Tempe
>
> Listserver Submissions:  heath at listserv.tempe.gov
> Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"
>

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"