[HeathKit] HW-101 Problem

[Gary Schafer]

Try nuetralizing the final. Also make sure the bottom shield for the driver
coils is making good contact. Tighten the screws that hold the shield plates
to the chassis.

73
Gary K4FMX


D Nance wrote:

> Well, I give up.  It's time to call in the experts.
>
> I spent the better part of Sunday cleaning up and working on a HW-101.
> I went through the entire alignment procedure and then noticed a strange
> problem which may or may not have existed before I worked on it:
>
> The unit is working fine on receive and transmits fine on 80 and 40
> meters.  However, on 20, 15 and 10 meters it shows out full output
> regardless of where the "Mic-CW gain" control is set.  Also, when I key
> the mic, I get full output.  Any ideas.
>
> My first suspicion was the shielding in the coil and bandswitch area.  I
> resoldered some of the shield connections but that did not seem to help.
>
> Any advice would be appreciated.
>
> 73,
> David Nance - W4SSE
> dmnance at roanoke.infi.net
>
> ---
> Submissions heathkit at qth.net

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"