HW-101 Problem

[D Nance]

Well, I give up.  It's time to call in the experts.

I spent the better part of Sunday cleaning up and working on a HW-101.
I went through the entire alignment procedure and then noticed a strange
problem which may or may not have existed before I worked on it:

The unit is working fine on receive and transmits fine on 80 and 40
meters.  However, on 20, 15 and 10 meters it shows out full output
regardless of where the "Mic-CW gain" control is set.  Also, when I key
the mic, I get full output.  Any ideas.

My first suspicion was the shielding in the coil and bandswitch area.  I
resoldered some of the shield connections but that did not seem to help.

Any advice would be appreciated.

73,
David Nance - W4SSE
dmnance at roanoke.infi.net

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"