Heath kit amp

[Mark S Graalman]

On Thu, 30 Mar 2000 12:56:58 -0500 Bob Meyer <Rascal at UTEC.NET> writes:
> I have some heathkit amps I got from a hamfest,
>
> 1 is a Warrior with 4 811A tubes.
>
> I have to rebuld powersupply and
> I have a set a tubes but CHINA 811A
> very poor verisoin but
> thay are new.
> any one know the SSB power out and CW?

  The Warrior will run about 500 watts out on SSB/CW

> Also what about AM/FM ?
> I have a KW1 I think also.

  I think the warrior was rated at 400 watts input AM/RTTY

The Chippawa KW1 used two 4-400A's and was rated for 2KW
PEP input


> has 1 3-500Z  but beeds a compleat rebuld.
> I may be wrong on model no.
> I did fix the blower.need 3-500z and caps in powersupply
> I have found RF parth has them.
> any one know the power SSB on 3-500Z?
>
> just some of the many heath kits I have been
> buying and fixing up!!
>
> Robert Meyer,
>
Mark  WB8JKR

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"