Printing over sized stuff revisited

[Paul W Sparks]

Automatic digest processor wrote:
>
> Subject: HEATH Digest - 18 May 2000 to 19 May 2000 (#2000-140)
> Date: Sat, 20 May 2000 00:00:25 -0700
> From: Automatic digest processor <LISTSERV at LISTSERV.TEMPE.GOV>
> Reply-To: Heathkit Owners and Collectors List <HEATH at LISTSERV.TEMPE.GOV>
> To: Recipients of HEATH digests <HEATH at LISTSERV.TEMPE.GOV>
>
> There are 2 messages totalling 68 lines in this issue.
>
> Topics of the day:
>
>   1. printing schematics (2)
>
> Sponsored by the City of Tempe
>
> Listserver Submissions:  heath at listserv.tempe.gov
> Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"
>
>   ------------------------------------------------------------------------
>
> Subject: Re: printing schematics
> Date: Fri, 19 May 2000 18:00:50 -0700
> From: Terry Perdue <terryp at HALCYON.COM>
>
> Mike (and anyone else who might be able to answer this) -
>
> This looks like a handy resource, but how does one print out one of the
> large schematics in its entirety? I can only get the left side to print, and
> scrolling to another section and printing again still prints only the left
> side. Thanks for your help.
>
> Terry Perdue K8TP
>
> ----- Original Message -----
> From: Mike Shelton <sheltonm at PHYSICS.UNC.EDU>
> To: <HEATH at LISTSERV.TEMPE.GOV>
> Sent: Thursday, May 18, 2000 11:00 AM
> Subject: Found new heath site
>
> > This may be of interest to some ,thought I would pass it on.
> >
> > http://www.circuitarchive.co.uk/heath.htm
> >
> > MANY SCHEMATICS !!!
> > --
> > Mike Shelton CET.
> >         ke4lgx
> > Electronic Technican III
> > UNC-Chapel Hill
> > ph:919-962-5475
> > fax:919-962-0480
> >
> > Sponsored by the City of Tempe
> >
> > Listserver Submissions:  heath at listserv.tempe.gov
> > Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath
> 'name' 'call'"
> > Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"
>
>   ------------------------------------------------------------------------
>
> Subject: Re: printing schematics
> Date: Fri, 19 May 2000 19:26:21 -0700
> From: Terry Perdue <terryp at HALCYON.COM>
>
> Thanks for the replies. At least one other person was having the same
> problem, so here's what I learned. (I'm running Internet Explorer, but I
> think Netscape will work about the same way):
>
> Right click the schematic, choose Save Picture As, and choose a destination
> folder. Use a program like Paintshop (I downloaded ACDSEE), fit the
> schematic to the page, and print it.
> If the schematic is a large one, you may have to crop it into sections and
> print them separately.
>
> Good luck.
>
> Terry

One can also print on legal sized paper (8.5" X 14") and set printer for
"landscape" printing.  You can also tell ACDSEE to "fit" that sized
paper as well . . .  BTW if that doesn't work for you try taking the
image on a floppy to KINKOS and let them have a go at it.

Paul

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"