Dial Cord & SB-101

[Gene A Nailon]

FROM: Gene Nailon  K5DLE   k5dle at juno.com
9 Nov. 2000

Hello Mark;

Go to your local hobby shop and get some stainless steel   U CONTROL
Cable for
model airplanes.  It will work great.

Best regards,

Gene
=================================================================

On Thu, 9 Nov 2000 11:29:09 -0500 Mark Johnson/Ontario/IBM
<mjohnson at CA.IBM.COM> writes:
> Hello Heath Team!
>
> My repair/restoration of the SB-101 from Hell is continuing on and
> my next
> task is to locate some old fashioned Dial Cord String.
>
> My latest Sb-101 problem was a transmit problem. Intermittently, the
> finals
> would HEAT UP and I actually blew one of the 6146's. Turns out the
> LOAD
> variable cap was intermittently shorting to ground. The reason; The
> drive
> belt puts too much tension on the long shaft (you know the old
> leverage
> rules) and over time, the shaft bent ever so slightly and the
> plates
> shorted!! Further, I have a later copy of the HW-101 manual and in
> it,
> there is an addendum that has you remove that belt and go back to
> the dial
> cord string solution. I can see why from first hand experience.....
>
> Anyway, where can I get some dial cord, OR is there some
> alternative
> solution like strong thread, string, whatever?????
>
> Thanks Team!
>
> Mark V. Johnson
> VE3DJU
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe
> heath 'name' 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff
> heath"
>

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"