Use of D104 Mike with Heath

[Stu Lyon]

I use an amplified D104 with my SB-101 very successfully. The output
impedance of the amplifier is very low so there is no problem driving the
Hi-Z input of the -101. You should set the D104 gain pot about 1/2 way.

There are actually two designs for the D104 amplifier -- the differance
being in the output stage. Both work about the same though.

Try it, you'll like it.

73, Stu W6CUX
Winnetka, CA


----- Original Message -----
From: "Jim Roik" <jnroik at ESCAPE.CA>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Thursday, November 09, 2000 12:06 PM
Subject: Use of D104 Mike with Heath


> Would anyone have the manual and specs for a D104 mike on a TUG-8 stand
with
> amplifier. I am wondering what the level and impedance are and if it is
> suitable for use with the the SB series equipment.
>
> Thanks.
>
> Jim  VE4AQ
>

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"