sb401

[Ed Richards]

Dennis;

Be certain to remove the B+ from the final plates and screens per the
manual. Also, neutralize in this condition using an RF probe in the
antenna connector per Heathkit's bulletin. Good Luck

On Sun, 19 Nov 2000 10:38:03 EST Dennis  Ka9Dzr <Ka9dzr at AOL.COM> writes:
>   need help on a sb401 tx.
>    when i first turn on the 401 i get abt 75-100 wats in tune.then
> it drops
> in power.
>    can only get abt 150 ma at 50 wats out.have low audio out.no alc
> indition
> on the meter.10 wats out on voice peaks on ssb. cw only 50 wats
> output.any
> type of help .tnx dennis
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe
> heath 'name' 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff
> heath"

Ed Richards K6UUZ
Sparks, NV 89431

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"