VTVM Meter Model IM_13

[Malloy, Geoff]

I just bought a probeless IM 13 as well and made my own probe set, but
didn't realize that the phone plug was non standard. Is the correct type of
plug still available from somewhere?

> Geoffrey C. Malloy
> Director, Business Systems Support
> University of Kentucky
> 303 Administration Building
> Lexington KY 40506
> V:(606)257-6690
> F:(606)257-1597
> E:gcmall2 at email.uky.edu


-----Original Message-----
From: Fred Olsen [mailto:fwolsen at EXECPC.COM]
Sent: Thursday, October 05, 2000 1:36 PM
To: HEATH at LISTSERV.TEMPE.GOV
Subject: Re: VTVM Meter Model IM_13


Exactly right Mark.  A normal phone plug WILL NOT take the possible 1000
or 1500V input, and neither will a common phone jack in place of the
original Nylon-insulated Switchcraft special.  One runs the risk of
frying an otherwise good meter, or an otherwise good oneself.

Fred

Mark Johnson/Ontario/IBM wrote:
>
>...be aware that the 1/4 inch plug on the
> end of these probes is NOT standard.

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"