NEED: SB-200 parts

[Mark S Graalman]

  WARNING! The SB-200 does NOT have a HV safety
interlock. The top plate does not push on the circuit
breakers, the plate has two holes in it to provide
clearance in case the breakers "pop up".

 Mark  WB8JKR


On Thu, 5 Oct 2000 19:37:33 -0600 Ray Friess <rayfri at NETWORLD.COM>
writes:
> I too am curious about that top plate.  mine is missing it and i am
> wondering if that top plate is supposed to press down on the two
> little breakers in there.  on mine, it doesnt seem they are mounted
> high enough to be touched by the top plate.  or are they capacitor
> discharge switches you press to discharge the caps before working on
> it.
> If that top plate is necessary, i guess I will get some cane metal
> at a local shop and cut one to size and mount it.
> ray  wa7itz
>
> TJLee wrote:
> >
> > Hello
> >
> > I am looking for the internal top plate cover for the SB-200
> amplifier.
> > This is the internal cover with the DANGER label on it.  Also
> looking
> > for the wafer switch for the metering circuits.  Any help is
> appreciated
> >
> > Ted N8GPQ
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe
> heath 'name' 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff
> heath"

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"