WTB: 3-48 screws

[Multi-Volti Devices]

Try www.mcmaster.com

McMaster Carr has no minimum order (well, you may have to buy a box of
screws, not one at a time), and prices are so-so (affordable, maybe not
lowest around, but very wide selection of all kinds of industrial supplies).

Murray
----- Original Message -----
From: Gerald C. Lemay <wa1vwl at GROLEN.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Thursday, October 26, 2000 6:35 PM
Subject: WTB: 3-48 screws


> Looking for a source of 3-48 screws, washers, and nuts. These are used
> extensively in Heathkits and not available at the local hardware stores.
> Heathkit used a lot of this type of hardware. I know a 2-56 screw will fit
> but it's too sloppy for my taste. You can probably force-fit a 4-40 screw
or
> enlarge the hole slightly to fit but I don't want to do that either. In
> restoring some of my recently acquired "treasures", I find many of these
> small screws rusty and I want to replace them. So, does anyone know of a
> vendor where I can buy a lifetime supply?
>
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"
>

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"