Fw: HW-16 meter

[Keith Harvey]

John.. Although not from the HW16, I have a meter that may fit. Looking at
the picture of the HW16 it looks like the meter is a horizontal unit with a
sideways meter movement. The meter I have is from a transceiver and displays
RF output along with S units to 40 over. It has a flat lens but a curved
meter face.
The meter is illuminated with a small "grain of wheat" bulb, probably 12v.

Measure the opening in the Heath front panel and let me know. This meter is
3.5cm wide by 1.2cm high, and needs 3.1 cm behind it for clearance.

Contact me at kharvey at brickstone.on.ca

73
Keith
VA3KRV


-----Original Message-----
From: J. Werner, W8QA <W8QA at AOL.COM>
To: HEATH at LISTSERV.TEMPE.GOV <HEATH at LISTSERV.TEMPE.GOV>
Date: Monday, September 04, 2000 07:10 PM
Subject: HW-16 meter


>Gentlemen:
>
>Can anyone spare a meter for an HW-16?  I bought one Bayside, and it came
>with the standard disclaimer about no guarantee.  Low and behold, the meter
>is kaput, making it impossible to dip the final.
>
>If no one has a meter to sell, can anyone recommend a source for a
>replacement movement?
>
>Thanking everyone in advance for their consideration, I also wish them best
>DX and very 73,  John, W8QA
>
>Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
>Listserver Submissions: heath at listserv.tempe.gov
>Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"