DX-40 Help

[Glen Zook]

It is possible to remove the contact from the switch
and replace it with one from another.  I have done
this numerous times.  You will have to obtain a very
small screw (probably from an optical source - mall
operation, etc.).

Just remove a contact from an unused switch by
carefully drilling out the rivit.  Then do the same
thing with the switch in the DX-40.  Replace the
contact with the new one, holding it in place with the
screw (actually a "bolt").

You might want to put some solder over the nut to hold
it permanently.

Glen, K9STH
--- Terry Hahn <w7kw at EARTHLINK.NET> wrote:

Does anyone know where a guy might find one of these?


__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
http://im.yahoo.com

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html