DX-40 Help

[john]

Try a model train store for the hardare too! They'll have 'em!
73
john


At 08:39 AM 8/31/01 -0700, Glen Zook wrote:
>It is possible to remove the contact from the switch
>and replace it with one from another.  I have done
>this numerous times.  You will have to obtain a very
>small screw (probably from an optical source - mall
>operation, etc.).
>
>Just remove a contact from an unused switch by
>carefully drilling out the rivit.  Then do the same
>thing with the switch in the DX-40.  Replace the
>contact with the new one, holding it in place with the
>screw (actually a "bolt").
>
>You might want to put some solder over the nut to hold
>it permanently.
>
>Glen, K9STH
>--- Terry Hahn <w7kw at EARTHLINK.NET> wrote:
>
>Does anyone know where a guy might find one of these?
>
>
>__________________________________________________
>Do You Yahoo!?
>Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
>http://im.yahoo.com
>
>-----------------------------------------------------------
>This list is a public service of the City of Tempe, Arizona
>-----------------------------------------------------------
>
>Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
>To post - HEATH at LISTSERV.TEMPE.GOV
>Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html