sb303 question

[mike bryce]

many thanks to all....

it's a 50 ohm resistor into the lmo output... that's assuming the receiver
is NOT connected to the matching transmitter..



Mike Bryce WB8VGE
SunLight Energy Systems

http://www.seslogic.com
http://www.theheathkitshop.com

"Electricity at the speed of light"

> From: mike bryce <prosolar at sssnet.com>
> Reply-To: mike bryce <prosolar at sssnet.com>
> Date: Mon, 3 Dec 2001 16:44:32 -0500
> To: HEATH at LISTSERV.TEMPE.GOV
> Subject: sb303 question
>
> Hola...
>
> I know there has to be a resistor placed in one of the output of the sb303.
>
> does anyone know the value and in what jack it goes?
>
> thanks!
>
> Mike Bryce WB8VGE
> SunLight Energy Systems
>
> http://www.seslogic.com
> http://www.theheathkitshop.com
>
> "Electricity at the speed of light"
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html