Heath SB-200 on AM

[Multi-Volti Devices (Murray)]

I forget, but I think it's in the manual, or maybe it's SSTV?


It's quite low, 200 W or so, if I remember.

Murray
----- Original Message -----
From: Ken <wn2sqc at YAHOO.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Sunday, December 16, 2001 10:31 AM
Subject: Re: Heath SB-200 on AM


> Hi List Members. Has anyone used the SB-200 for AM and
> if so how hard can you push the rig before the tubes
> melt? What output power should be expected and what
> grid and plate current would be appropriate for
> maximum AM output. Thanks for the help, Ken
>
> __________________________________________________
> Do You Yahoo!?
> Check out Yahoo! Shopping and Yahoo! Auctions for all of
> your unique holiday gifts! Buy at http://shopping.yahoo.com
> or bid at http://auctions.yahoo.com
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html