Eico (HV fuses)

[Jim Berry]

Hello Group,

You can make a cheap and dirty HV fuse.  It would consist of one
strand of wire from an old line cord, about 3 or 4 inches long.  You
can put that little piece of wire in a hunk of spaghetti tubing.  I
would make sure that the spaghetti tubing was the flame proof kind.
You don't want the fuse to open, and then set your rig on fire.
Cheap to make.  Build several.  Test them out.  Will save hard to
find xformers.

73 Jim K7SLI

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"